LED Lighting Solutions with Aluminum Profile “PL107”
Aluminum Profile “PL107“: Surface Mounted or Suspended
Aluminum Profile “PL107” is a Versatile Lighting Solution Suitable for a Range of Residential, Commercial, or Retail Modern Lighting Applications. with the Ability to Hold (2) Rows of High-Output LED Strips, It Offers Bright and Energy-Efficient Lighting. the Profile’s 2-Inch Wide Design Makes It an Attractive Option in a Variety of Spaces.
Suspension Kit or Screw into Surface
With Aluminum Profile “PL107“, There are Two Options for Installation. One Can Either Use the Included Suspension Kit or Screw the Profile Directly into the Desired Surface.
Mounting Method #1: Use of Suspension Kit
Our Included Suspension Kit Makes Installation Quick and Easy. Simply Screw the Anchor into Your Desired Surface, Install the Included Aircraft Cable, and Cut It to Your Desired Length. the Closed End-Cap Can Be Installed onto the Light Fixture After Sliding Cable-Grip Retaining Screws into the Rear Channel of the Aluminum Housing. Insert the End-Cap and Tighten the Cable-Gripper onto the Light Fixture. the Aircraft Cable Can Now Be Pulled into the Cable-Grip and Adjusted to the Desired Suspension Height.
Mounting Method #2: Screw into Surface
For a More Traditional Installation Method, Drill a Hole Specific to Your Mounting Screw Diameter into the Aluminum Housing. Counter-Sink the Hole so a Flat-Head Screw Can Sit Flush with the Housing. Install LED Strip over the Screw.
Customizing to Your Desired Length
To Cut Your Aluminum Profiles and Make Your Lighting Fixtures a Custom Length, Simply Snap the Lens onto the Profile and Place the Channel onto a Miter Saw with the LED Cover Facing down. by Doing This, You Can Easily Cut both the Channel and Cover to Your Desired Length at the Same Time. We Recommend Using a New Fine-Tooth Blade to Cut Your Aluminum Channels for LED Strips. the Diffuser/Cover is Fragile and Will Easily Break with an Old Blade. the Easiest Way to Avoid Breaking a Cover or Diffuser is to Lower the Saw Blade Slowly While Cutting.
Evenly Diffused Lighting
For Dot-Free Evenly Diffused Lighting, Choose from the Following Dotless LED Strips:
Choose Aluminum Profile “PL107” for Your Next Lighting Project and Enjoy a Sleek and Modern Look with Energy-Efficient LED Lighting.
PL107-1.97 Inch * 2.95Inch(50*75MM)