Aluminum Profile “PL105” for Creative Lighting Solutions
Aluminum Profile “PL105” is the Perfect Solution for Suspended Mounted Installations in Showrooms, Retail Spaces, Kitchens, and Any Creative Lighting Solutions. Its Square cover Provides an Attractive Look, While Protecting LED Strips from Direct Exposure to Damaging Elements. the Channel Can Be Suspended or Surface Mounted, Depending on Your Specific Application.
Mounting Method #1: Suspension Kit
Our Suspension Kit Makes Installation a Breeze. Simply Screw the Anchor into Your Mounting Surface, Install the Included Aircraft Cable, and Cut It to Your Desired Length. to Install the Closed End-Cap onto the Light Fixture, Slide Cable-Grip Retaining Screws into the Rear Channel of the Aluminum Housing. Insert End-Cap, and Tighten Cable-Gripper onto the Light Fixture. the Aircraft Cable Can Now Be Pulled into the Cable-Grip and Adjusted to the Desired Suspension Height.
Surface Mounting Method (Direct-Screw)
For Surface-Mounted Applications, Drill a Hole Specific to Your Mounting Screw Diameter into the Aluminum Housing. Counter-Sink the Hole so a Flat-Head Screw Can Sit Flush with the Housing. Then, Install the LED Strip over the Screw.
To Make Your Lighting Fixtures a Custom Length, Snap The Cover onto the Profile and Place the Channel onto a Miter Saw with the Cover Facing down. This Way, You Can Easily Cut both the Channel and Cover to Your Desired Length at the Same Time. for Best Results, Use a New Fine-Tooth Blade to Cut the Aluminum Channels for LED Strips. the Diffuser/cover is Fragile and Will Easily Break with an Old Blade. Lower the Saw Blade Slowly While Cutting to Avoid Breaking a Lens or Diffuser.
Achieve Dot-Free, Evenly Diffused Lighting in Aluminum Profile “PL105” with Our Dotless LED Strips. Choose from Our Most Popular 12V and 24V Dotless White LED Strips.
PL105-1.97 Inch * 1.97Inch(50*50MM)